-4-
FAQ :
How to factory reset Range Extender DAP-1320)
Version 1.00
Technical Support Setup Procedure
How to factory reset Range Extender (DAP-1320)
Step 1:
Plug in the DAP-1320 upside down into a power outlet. The LED on the front will turn RED and
then after a few seconds will turn ORANGE or GREEN depending if it was previously setup
Step 2:
On the bottom of the DAP-1320 is a reset pinhole. Using a paperclip, press and hold the reset
button for 10 seconds (or until the LED on the front turns red), and then let go.
The DAP-1320 will then reboot and be at factory default settings.