manualshive.com logo in svg

D-Link DAP-1160, User Manual

Share
Download
D-Link DAP-1160 User Manual Download Page 71

71

D-Link DAP-1160 User Manual

Appendix C - Technical Specifications

Technical Specifications

Standards

 

• IEEE 802.11g, compatible with 802.11n devices

 

• IEEE 802.3

 

• IEEE 802.3u

Security

 

• Wi-Fi Protected Access (WPA, WPA2)®

 

• Wi-Fi Protected Setup™ (WPS)

     

  - PBC

     

  - PIN

 

Interface Type

 

• 2 10/100 LAN/WAN Port

 

• 1 Push-Button (for Reset and Wi-Fi Protected Setup™)

Maximum Operating Voltage

 

• 12V / 0.5A

Frequency Range

2

 

• 2.4GHz to 2.483GHz

LEDs

 

• Power  

• Wireless 

 

• WPS

Operating Temperature

 

• 32°F to 131°F ( 0°C to 55°C)

Humidity

 

• 90% maximum (non-condensing)

Safety & Emissions

 

• CE

 

• Wi-Fi

Dimensions

 

• 120 (W) x 92 (D) x 24.5 (H) mm 

1

Maximum wireless signal rate derived from IEEE Standard 802.11g and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, 

including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely 

affect wireless signal range.

2

Range varies depending on country’s regulation.

Summary of Contents for DAP-1160









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands