D-Link DWL-8200AP User Manual
To configure the
DWL-8200AP
, use a computer which is connected to the
DWL-8200AP
with an Ethernet cable (see the
Network Layout
diagram).
First, disable the
Access the Internet using a proxy server
function. To disable this function, go to
Control Panel > Internet Options >
Connections > LAN Settings
and un-check the enable box.
Configuration
Logging In
Start your web browser program (Internet Explorer, Firefox).
Type the IP address of the
DWL-8200AP
in the address field (http://192.168.0.50) and press
Enter
. Make sure that the IP addresses of
the
DWL-8200AP
and your computer are in the same subnet.
DWL-8200AP
also supports HTTPS Browsing by using the Secure Socket
Layer (SSL) Protocol. Just change your Browser’s address line from “http://...” to “https://...” and log into the AP again.
After the connection is established, you will see the user identification window as shown.
Note:
If you have changed the default IP address assigned to the DWL-8200AP, make sure to enter the correct IP address.
