66
D-Link COVR-X1870 || COVR-X1872 || COVR-X1873 || COVR-X1874 User Manual
Section 3 - Configuration
Advanced Settings - LED Control
Status LED:
Choose to enable or disable the COVR status indicator LED
on the
front panel
of both Covr Point A and the other Covr
Point(s). When disabled, the LED will no longer light up solid
white during normal operation and will instead turn off.
The LED will still light up in the corresponding color and mode in
any of the following circumstances:
-Firmware upgrade
-Device reboot
-Establishing a WPS connection
-Weak uplink signal
-No uplink signal
Once any of the above situations has ended, the LED will briefly light
up solid white and then turn off again.
Click
Save
when you are done.
Admin (Continued)