24
D-Link DSL-5300 User Manual
Section 4 - Configuration
DSL
Click the
DSL
button to see the DSL hardware connection information.
DSL Phy
Version:
Displays the DSL Phy version.
Cable Status:
Displays the current cable status.
DSL Status:
Displays the current negotiation state of the DSL port.
Mode:
Displays the current DSL mode.
Link Power
State:
Displays the current link power state.
SNR Margin (0.1
dB):
The DSL connection's signal-to-noise ratio is listed here.
Attenuation (0.1
dB):
The DSL connection's attenuation is listed here.
Output Power
(0.1 dBm):
The DSL connection's power output is listed here.
Attainable Rate
(Kbps):
The measured maximum attainable rate is listed here.
Rate (Kbps):
The negotiated connection speed is listed here.
CRC Errors:
Displays the number of Cyclic Redundancy Check errors.
FEC Errors:
Displays the number Forward Error Correction Errors.
HEC Errors:
Displays the number of Header Error Control Errors.
Click the
Go to settings
button to be taken to
Internet on page 29.