25
System Requirements
D-Link ANT70-0800
Dual-Band Omni-Directional Antenna
ANT70-Series
D-Link ANT70-0801
Dual-Band Omni-Directional Antenna
Electrical specifi cation
Environmental & Mechanical Characteristics
Frequency Range
2400 MHz - 2500 MHz 5400 MHz - 5875
MHz
Gain
8 dBi
8 dBi
VSWR
2.0 : 1 Max.
HPBW / horizontal
360°
HPBW / vertical
15°
Polarization
Linear, vertical
Power handling
5 W (cw)
Impedance
50 Ohms
Connector
N Jack
Survival wind speed
216 km/hr
Temperature
- 40°C to +70°C
Humidity
95% @ 55°C
Radome color
Gray
Radome material
ABS, UV resistant
Weight
350 g
Dimensions
80x78x870 mm
Dual-Band Omni-Directional Antenna
for 2.4 / 5.4 / 5.6 / 5.8 GHz
ANT70-0801
Electrical Specification
Frequency range 2400 MHz - 2500 MHz 5400 MHz - 5875 MHz
Gain
8 dBi
8 dBi
VSWR 2.0 : 1 Max.
HPBW / horizontal 360°
HPBW / vertical 15°
Polarization Linear, vertical
Power handling 5 W (cw)
Impedance 50 Ohms
Connector N Jack
Environmental & Mechanical Characteristics
Survival wind speed 216 km/hr
Temperature - 40°C to +70°C
Humidity 95% @ 25°C
Radome color White
Radome material ABS, UV resistant
Weight 348 g
Dimensions ø22 x 90 mm
Package Contents
-D-Link ANT70-0801 Antenna
-Extension Cable(50cm)
-Surge Protector
-Mounting Kit
-Water-proof tape
-Quick Installation Guide
Mounting Configurations for pole/ wall
Omni-Directional Antenna for 802.11b/g
Pole(max
φ
=50mm)
Wall
2
3
1
4
1
5
6
1 Antenna body
2 M5-0.8 nut
3 M5 Washer
4 M5 U-Type Screw
5 Screw
6 Anchor
When you install the antenna,
please try to find an open space like
the picture (1) , avoid to install like
the picture (2) cause the omni-directional
signals might be blocked and performance
be affected.
Picture (1)
Picture (2)
Please always install the antenna
vertically to the horizontal surface, not
recommended to mount it perpendicular
to the wall.
Picture (3)
Mounting Configurations for pole/ wall
Omni-Directional Antenna for 802.11b/g
Pole(max
φ
=50mm)
Wall
2
3
1
4
1
5
6
1 Antenna body
2 M5-0.8 nut
3 M5 Washer
4 M5 U-Type Screw
5 Screw
6 Anchor
When you install the antenna,
please try to find an open space like
the picture (1) , avoid to install like
the picture (2) cause the omni-directional
signals might be blocked and performance
be affected.
Picture (1)
Picture (2)
Please always install the antenna
vertically to the horizontal surface, not
recommended to mount it perpendicular
to the wall.
Picture (3)
2.4 GHz:
5 GHz:
2.4 GHz:
5 GHz:
1.Antenna body
2.M5-0.8 nut
3.M5 Washer
4.M5 U-Type Screw
5.Screw
6.Anchor
