AirPremier N Dual Band PoE Access Point Command Line Interface Manual
12
get mcastrate
Display mcast rate
get rogue_ap
Display Rogue AP List
get zonedefence
Display Zonedefence
get zonedefence-ip
Display Zonedefence IP table list
set acktimeout_a
Set acktimeput in A band (range: 50--200)
set acktimeout_g
Set acktimeput in G band (range: 64--200)
set ap_band
Set ap band (2.4G or 5G)
set apmode
Set AP operation mode
set autorekey
Set autorekey enable
set aparray-state
Set AP Array state
set arrayname
Set AP Array arrayname
set arrayrole
Set AP Array role[master:1, backup master:2, slaver:3]
set arraypassword
Set AP Array password
set array_syncnode_enable
Set array_syncnode enable
set array_syncnode_disable
Set array_syncnode disable
set assoclimit
Set Association Limit
set authentication
Set authentication type
set autoChannel
Set auto channel
set beaconinterval
Set beacon interval (range: 25--500)
set cipher
Set Cipher of wep,tkip,aes, or auto
set Channeltype
Set Channel type
set cwm
Set CWM
set d-wepkeylen
Set 802.1X dynamic WEP Key Length
set d-wepkeyupdate
Set 802.1X dynamic WEP Rekey Interval(in Secs)
set defkeyindex
Set default key Index [1--4]
set dtim
Set DTIM (1--15)
set 2.4G fixedrate
Set fixrdrate
set 5G fixedrate
Set fixrdrate
