D-Link AirPremier N DAP- 2590 User Manual Download Page 21

Page: 21 / 81

DAP-590 User’s Manual

D-Link AirPremier N Dual Band PoE Access Point

Home > Basic Settings > Wireless > Wireless Client mode

This option is unavailable in wireless client mode.

Mode:

Network Name (SSID):

SSID Visibility:

Wireless Band:

Using the Configuration Menu

Select either

2.4 GHz

5 GHz

from the pull-down menu.

Wireless Client

is selected from the pull-down menu.

Service Set Identifier (SSID) is the name designated for a specific
wireless local area network (WLAN). The SSID’s factory default
setting is

dlink

. The SSID can be easily changed to connect to an

existing wireless network.

Enabling this feature automatically selects the channel that will
provide the best wireless performance. This feature is not supported
in Wireless Client mode.

Auto Channel

Selection:

Summary of Contents for AirPremier N DAP- 2590


















































































Search results

Summary of Contents for AirPremier N DAP- 2590

Reviews:

Brands by name

Popular brands

D-Link AirPremier N DAP- 2590, User Manual

Search results

Summary of Contents for AirPremier N DAP- 2590

Reviews:

Brands by name

Popular brands