14
Link Info
Using the Configuration Utility
(continued)
After clicking on the Configuration Utility icon, the
Link Info
screen will display
the settings for the DWL-AG530:
SSID:
The Service Set Identifier is the
name assigned to the wireless
network. The factory SSID set-
ting is
default
.
Tx Rate:
Tx Rate settings are automatically determined for an optimal speed up to a
maximum of 54Mbps (108Mbps in Turbo mode).
Status:
Displays the MAC address of
the access point or router to
which the DWL-AG530 is asso-
ciated.
Channel:
The channel selection is automatically determined by the DWL-AG530.
Frequency:
802.11b indicates that the DWL-
AG530 is communicating in the
2.4GHz band.
Encryption:
You can see if WEP (Wired Equivalent Privacy) is
Enabled
or
Disabled
here.
Wireless Mode:
Either
Infrastructure
or
Ad-Hoc
will be displayed here. (Please see the
Getting
Started
section in this manual for an explanation of these two modes.)
Signal Strength/Link Quality:
Packet Count:
Displays the statistics of the data packets that are transmitted and received.
Rescan Button:
Rescans for the strongest signal in your environment and associates with that
access point or router.
Displays the Link Quality for the DWL-AG530 wireless connection to the ac-
cess point. The signal strength represents the wireless signal between the
access point and the DWL-AG530. The percentage coincides with the graphi-
cal bar.
Connection Info:
The connection status is displayed here.
*
Due to DFS (Dynamic Frequency Selection), 5GHz Ad-Hoc mode is always disable in EEC countries.
