background image

42

Governing Law:  This Limited Warranty shall be governed by the laws of the State of California. Some
states do not allow exclusion or limitation of incidental or consequential damages, or limitations on how
long an implied warranty lasts, so the foregoing limitations and exclusions may not apply. This limited
warranty provides specific legal rights and the product owner may also have other rights which vary
from state to state.

Trademarks:  D-Link is a registered trademark of D-Link Systems, Inc. 

Other trademarks or registered

trademarks are the property of their respective manufacturers or owners.

Copyright Statement:  No part of this publication or documentation accompanying this
Product may be reproduced in any form or by any means or used to make any derivative
such as translation, transformation, or adaptation without permission from D-Link
Corporation/D-Link Systems, Inc., as stipulated by the United States Copyright Act of
1976.  Contents are subject to change without prior notice.  Copyright

©

 2002 by D-Link

Corporation/D-Link Systems, Inc. All rights reserved.

CE Mark Warning:  This is a Class B product. In a domestic environment, this product may cause radio
interference, in which case the user may be required to take adequate measures.

FCC Statement:  This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communication. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

Consult the dealer or an experienced radio/TV technician for help.

Register your D-Link product online at http://support.dlink.com/register/

 (05/07/04)

For detailed warranty outside the United States, please contact corresponding local
D-Link office.

FCC Caution:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.

The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment; such modifications could void the user’s authority to operate the
equipment.

Summary of Contents for AirPlus G DWL-700AP











































Reviews: