14
Configuration Menu
AP Name:
You may choose to rename your Access Point, especially if you
have more than one Access Point on your network.
SSID:
(
Service Set Identifier
)
“default” is the default setting.
The SSID
is a unique name that identifies a network. All devices on a network must
share the same SSID name in order to communicate on the network.
If you
choose to change the SSID from the default setting, input your new SSID
name in this field. The SSID can be up to 32 characters in length.
Channel: Channel 6 is the default channel
. Input a new number if you
want to change the default setting. All devices on the network must be set to
the same channel to communicate on the network.
WEP Encryption:
Select
Enable Encryption
to use
WEP
(
W
ired
E
quivalent
P
rivacy) on the network. All devices on the network, and the Access Point,
must share the same WEP selection – either
Enable
or
Disable
, and they
must share the same WEP key. The WEP key is generated from
ASCII
or
Hexadecimal
entries that are either 64, 128, or 256 bit in length. When
enabling encryption, select the
Key Type
(ASCII or Hexadecimal) and then
input the appropriate digits or letters. You can create up to 4 keys. Select
the key you wish to use.
Click
Help
at any time for more information.
Click
Apply
if you have made any changes or additions.
This window displays the default
settings of the DWL-900AP+.
The default IP Address is
192.168.50. If you select
Dynamic IP Address
, you will
obtain a dynamic IP Address
from a DHCP server on your
network. (This is not advisable
since it will be difficult to
determine the dynamic IP
address assigned to the DWL-
900AP+.) The
Subnet Mask
is
255.255.255.0. Input the IP
Address of the
Gateway
(the
router on your network.)
Click
Apply
if you have made any changes.
Hexadecimal
digits consist of the numbers 0-9 and the letters A-F
ASCII
(American Standard Code for Information Interchange) is a code
for representing English letters as numbers from 0-127
Fig. 5.4