background image

 

17 

 

 

Web Configuration

 

  

Static IP Address

 

 

Bridge Name:  

The default setting is to leave this field blank.  You may enter 

a name for the DWL-810.  This is optional. 
 

Allow Upgrade Uploads:  

When upgrading firmware, select this checkbox.  

Deselect this checkbox during normal operation, when not upgrading 
firmware. 
 
After completing the configuration, click 

Save

 to save the changes. 

Click 

Cancel

 to discard the changes. 

 
Changes will take effect after restarting the DWL-810.  To restart, click 

Admin

 in the menu.  Click 

Reboot

 to restart the DWL-810. 

 

    Stations 

 

 
Click on 

Stations

 in the menu.  A 

Stations

 table will appear, as shown here, 

providing information regarding the device connected to the DWL-810. 
 

Bridge Table:  

the table displays the IP Address and the MAC Address of 

the device that is wirelessly connected to the DWL-810. 

When assigning IP Addresses to the computers on the network, please
remember that the 

IP Address for each computer must be in the same IP

Address range as all the computers in the network

, and the subnet mask

must be exactly the same for all the computers in the network.

 

For example:  If the first computer is assigned an IP Address of 192.168.0.2 with
a Subnet Mask of 255.255.255.0, then the second computer can be assigned an
IP Address of 192.168.0.3 with a Subnet Mask of 255.255.255.0, etc.

 

IMPORTANT: If computers or other devices are assigned the same IP
Address, one or more of the devices may not be visible on the network. 

Fig. 5.6 

Summary of Contents for AirPlus DWL-810


























Reviews: