35
2. I cannot connect to the Access Point or the wireless Router.
3. The DWL-AG650 Power and Link lights are not on.
4. I forgot my Encryption key.
Make sure that the SSID on the DWL-AG650 Cardbus adapter is
exactly the same as the SSID on the Access Point or wireless
Router.
Move the DWL-AG650 and Access Point or wireless Router into
the same room and then test the wireless connection.
Disable all security settings. (WEP, MAC Address Control, AES)
Make sure that the Access Point/Router is not locked down to a
different frequency
Turn off your Access Point and the computer with the
DWL-AG650. Turn on the Access Point, and then turn on the
computer with the DWL-AG650.
Refresh the DWL-AG650 Utility
Check to see if the DWL-AG650 Cardbus adapter is firmly
inserted into the Cardbus slot of your laptop computer.
Troubleshooting
!
!
!
!
!
!
!
Reset the Access Point to its factory default settings and restore the
DWL-AG650 Wireless Cardbus Adapter to the factory default
settings.
!
5. The computer does not recognize the DWL-AG650 Wireless Adapter.
Make sure that the DWL-AG650 Wireless Adapter is properly seated
in the computer’s Cardbus slot.
If Windows does not detect the hardware upon insertion of the
adapter, make sure to completely remove drivers that were
previously loaded. To remove the drivers, do the following:
!
!
