802.11 b/g /n Access Point Command Line Interface Manual
8
3
UTILITY COMMANDS
Help Command:
Function
Syntax
help
Display CLI Command List
help or ?
Ping Command:
Function
Syntax
ping
Send ICMP ECHO_REQUEST to network hosts
ping <xxx.xxx.xxx.xxx>
Restart and Exit Commands:
Function
Syntax
set factorydefault
Restore to factory default setting
set factorydefault
reboot
Reboot Access Point. It is necessary to reboot the AP after making
Configuration changes for those changes to take effect.
reboot
ssl freset
Use freset to factorydefault
ssl freset
get bootcodeinfo
Display bootcode information
get bootcodeinfo
Version & HW Display
Command:
Function
Syntax
version
Displays the currently loaded firmware version
version
get cpuinfo
Display cpu info percentage
get cpuinfo
get meminfo
Display mem info percentage
get meminfo
get hardware
Display Hardware Revisions
get hardware
get macaddress
Display Mac address
get macaddress
get country
Display Country
get country
get pingctl
Display Ping Control state
get pingctl
get inact
Display the value of a specific inact
get inact
set pingctl
Set Ping Control
set pingctl