14
Using the Configuration Utility with Windows OS
(continued)
Link Info
SSID:
The Service Set Identifier is
the name assigned to the
wireless network. The
factory SSID setting is
default
.
Tx Rate:
The default setting is
Auto
; Tx Rate settings are automatically determined for
an optimal speed up to a maximum of 11Mbps.
Status:
Displays the MAC Address
of the Access Point or
Router to which the DWL-
122 is associated
Channel:
The default setting is
Auto
. The channel selection is automatically determined
by the DWL-122.
Signal Strength:
Displays the signal strength of the DWL-122’s wireless connection to the
Access Point or Router.
Packet Count:
Displays the statistics of the data packets that are transmitted and received.
Frequency:
802.11b indicates that the
DWL-122 is communicat-
ing in the 2.4GHz band.
Encryption:
You can see if WEP (Wired Equivalent Privacy) is
Enabled
or
Disabled
here.
Wireless Mode:
Either
Infrastructure
or
Ad-Hoc
will be displayed here. (Please see the
Getting Started
section in this manual for an explanation of these two modes.)
Rescan Button:
Rescans for the strongest signal with the current SSID and associates with
that Access Point or Router
