1
DWL-120 Driver Upgrade Procedure
Preparation for Upgrade
•
Make sure that the DWL-120 is
rev. 1A
. The 128-bit upgrade
requires the rev. 1A version of the DWL-120, and will not work with
prior versions of the hardware because of chipset limitations.
•
Download the
DWL120_DRIVERS_v225.02.zip
from
http://support.dlink.com/
to a local directory such as c:\temp.
•
Unzip
DWL120_DRIVERS_v225.02.zip
into a folder on the
computer’s hard drive such as c:\DWL-120.
•
Make sure that the DWL-120 is connected to the USB port and the
drivers are already installed in the computer.
NOTE
: If the DWL-120 drivers have not been installed in the
computer, please refer to the quick installation guide for the proper
installation procedure.
