CONFIGURATION
Select the
CONFIGURATION
tab to view the current
settings for:
SSID
(Service Set Identifier)
is a name that
identifies a wireless
network. Access
Points and wireless
clients attempting to
connect to a specific
WLAN (Wireless
Local Area Network)
must use the same
SSID. The default
setting is
default
.
Note:
To perform an
automatic search of
available wireless
network, change the
SSID setting to
Auto
Detect
.
Network Type
Use
Infrastructure
mode if you will be
using an Access Point
in your network.
Use
Ad-Hoc
, if you
will not be using an
Access Point. Ad-hoc
requires the same
channel and the same
SSID for wireless
devices on the
network.
802.11 Ad-hoc
requires the same
channel and SSID
among the wireless
clients.
Power Save Mode
–
The Power Save mode is
used to extend battery life.
Note: In Power Save mode, the Access Points
used must support Power Saving for
communication to be established.
Tx Rate
(Transmission rate)
–
The default
transfer rate is
Auto
which allows the
DCF-
660W
to adjust to the most optimal transfer
rate available. However, the settings can be
et at a fixed transfer rate.
s
NOTE:
Click
Apply
to save any changes.