background image

60

D-Link DAP-1360 User Manual

Section 3 - Configuration

Watchdog

Enable Watchdog

(Ping of Life):

Update Time

Interval:

Watchdog Response

IP:

Enable Mail Alert:

SMTP Server:

Sender E-Mail:

Receiver E-Mail:

Enable

Authentication:

Account Name:

Password:

Check this box to enable the Watchdog (Ping 

of Life) to check some host IP. 

Enter the time interval of how often you would 

like  the Watchdog  to  ping  the  response  IP 

address. 

Enter the IP address that the Watchdog will 

ping.

Check this box to enable e-mail notification for 

the Watchdog.

Enter the SMTP server IP address.

Enter the e-mail address from which the

notification will be sent.

Enter the e-mail address which the notification 

will be sent to.

Check the box to enable authentication that is used with the SMTP server.

Enter your account name that is used with the SMTP server.

Enter your password that is used with the SMTP server and re-enter it in the next box.

The Watchdog feature pings a specified IP address. If the IP address stops responding to pings, your AP will be rebooted. You 

can also select an option to have the DAP-1360 send an e-mail alert if the specified IP address stops responding to pings.

Summary of Contents for 0790069323058






































































































Reviews: