99.823.93 2.1/03/12
99.823.93 2.1/03/12
6/16
7/16
KA 66/106-SW-K
KA 66/106-SW-K
Technical data
Type
KA 66/xxx-SW -K
KA 106/xxx-SW-K
Power supply
230 VAC / ±15%
230 VAC / ±15%
Performance
45 W / 75 VA
75 W / 115 VA
Nominal force
2x 300 N
2x 500 N
Nominal locking force
1000 N
Lifetime
>10 000 double strokes
Duty cycle
30 % (With cycle time 10 minutes)
Housing
Anodized aluminium
Ingress protection
IP 32
(With covering stoppers delivered with bracket sets)
Temperature range
-5 ... +75°C
Fire stability
30 min / 300°C
Nominal stroke length *
See type plate
Additional functions *
Closing edge protection activated (3 stroke repeatings)
Locking relief activated
* Programmable with software SW-BSY+
Running speed and forces
11,8 mm/s
KA
66-SW
-K: 2x 300** N
KA
106-SW
-K: 2x 500** N
Closure Ranges
English
All approx. 20 % switch-off reserve (temporary)
Beside
closing edge
Beside closing edge
Main closing edge
Closing edge protection
In the "CLOSE" direction the drive has an active
protection for the main closing edge. If there is an
overload in the closing range 3 and 2, the drive runs
"OPEN" for 10 seconds, then "CLOSE" again. If after
three attempts closing is not possible, the drive
remains in this position.
In addition, the drive is equipped with passive
protection. The closing speed in closing range 2 and
1 is reduced to 5 mm/s.
Significantly greater forces can be
exerted at the secondary closing
edges. Danger of crushing hands and
fingers!
Maintenance and cleaning
Inspection and maintenance has to be carried out
according to D+H maintenance notes. Only original
D+H spare parts may be used. Repair is to be carried
out exclusively by D+H.
Wipe away debris or contamination with a dry, soft
cloth.
Do not use cleaning agents or solvents.
Declaration of Conformity
Electrical devices, accessories and packaging
should be sorted for environmental-friendly recycling.
Do not dispose electrical
devices into household waste!
Only for EC countries:
According the European Guideline
2002/96/EC for waste electrical and
electronic equipment and its implemen-
tation into national right, electrcal devices that are no
longer usable must be collected separately and
disposed of in an environmentally correct manne
Disposal
Guarantee
You will get
2 years guarantee
for all D+H products
from date of verified handing over of the system up to
maximal 3 years after date of delivery, when
mounting and starting has been carried out by
an
authorized D+H-distributor.
D+H guarantee is expired, with connection of D+H
components with external systems or with mixing of
D+H products with parts of other manufacturers.
We declare under our sole responsibility that the
product described under “Technical Data” is in
conformity with the following directives:
2004/108/EC, 2006/95/EC
Technical file at:
D+H Mechatronic AG, D-22949 Ammersbek
Thomas Kern
Maik Schmees
Member of the Board
Authorized signatory, Technical Director
12.10.2009
English
12,2 mm/s
(with tensile force (1/2 nominal load) 16,1 mm/s)
