P1
DOSING
PUMP
www
.theaquariumsolution.
com
7
At the top of the screen you will see the container section. This is a
really handy section that allows you to approximate how much solution
there is left in the container based on your current dosing schedule.
In order for this to work correctly, you must enter the volume of your
container to the best of your ability.
The next section is the cycle. Here you are able to determine if you
want to dose on a daily basis or as infrequent as once every 31 days.
You can also set the pump to dose on a weekly basis which allows you
to then select which days of the week you want to dose.
To select the days of the week you want to dose, just tap on the day
until a blue check mark is added to the right side.
The final and bottom section is your actual schedule. Here you can
tell the doser to administer a daily total volume and spread it evenly
12 times in a day.
To create a repeating schedule, tap on the ‘
Plus Symbol
’ at the bottom
right of the app.
For an automated single dose regiment that repeats itself daily, select
‘
Add Plan
’. To create a more intricate schedule that divides a total
volume into multiple equal amounts, then select ‘
Quick Plan
’.
The Anti-chemical interference setting allows you have another plan or
pump dosing at the same time, one pump will delay administering the
chemical by 5 minutes to ensure that the two chemicals do not mix.
Once you have configured all settings, tap on ‘
Save
’ at the upper
right hand corner. The main screen will now show your entire dosing
schedule and is now set to begin automatically dosing.
