background image

H 2 O c e a n   S k i m m e r   G u a r d i a n  

w w w.t h e a q u a r i u m s o l u t i o n .c o m

4

EN

INSTALLATION

When connecting to mains power the controller will beep and flash 5 
times and then ‘flash only’ 5 times. The green LED will then flash on and 
off for 2 minutes during the initialisation stage. The LED then turns solid 
green to indicate that power is switched on to the skimmer, which should 
now begin to operate.

Mount the sensor 
at the required 
maximum fill level on 
the skimmer cup. 

Plug the Skimmer 
Guardian into a 
240V socket.

1

Plug the skimmer 
into the Skimmer 
Guardian

2

3

OPERATION

During normal operation the Skimmer Guardian alarm will be illuminated 
solid green and there will be no flashing or audible alarm. When the 
skimate level in the cup reaches the sensor, it will activate the AC switch 
and remove power from the skimmer or other device plugged into 
the Skimmer Guardian. The power will remained switched off until the 
skimmer cup has been emptied. 

The Skimmer Guardian incorporates a latching function and will 
automatically switch the power back on to the controller if the level in the 
cup is reduced, as would happen in the case of a skimmer cup that is 
fitted with a drain valve.

Summary of Contents for H2Ocean COMPACT ATO













Reviews: