OPERATION MANUAL
D-Cut Laminate Cutter XP-215
www.dcutproducts.com
CUTTING AND C
Page 1: ...OPERATION MANUAL D Cut Laminate Cutter XP 215 www dcutproducts com CUTTING AND C ...
Page 2: ...f the cut is longer than 20cm 8 inch it is recommended to make a few cuts with the increment of 5cm 2 inch for each cut in order to follow the marked cutting line After making each cut pull the handle back up Slide the cut portion of the flooring towards the pivot of the blade and cut again Repeat the procedure until the full length of the cut is completed Straight Cut Place the flooring plank ont...
Page 3: ...r base Mark a line on the laminate plank and place it on the base Hold it down firmly while pushing down the cutter blade Small teeth located along the cutting slot will keep the laminate plank from slipping If the cut is longer than 20cm 8 inch it is recommended to make a few cuts with the increment of 5cm 2 inch for each cut in order to follow the marked cutting line After making each cut pull t...
Page 4: ... 1 4 Customized Bolt 1 17 Chain 1 5 Blade Holder 1 18 Hook B 1 6 Solid Rivet 4 19 Rubber Feet 5 7 Rubber Pad 1 20 Blind Rivet 5 8 Handle 1 21 Stopper Attachment 1 9 Hook A 1 22 Ash bin 1 10 Right ABS Handle 1 23 Supporting Stand 1 11 Nut M4 2 24 Flange Nut 1 12 Left ABS Handle 1 25 Blade Stopper 1 13 Cross Head Screw M4 31 2 ...
