4
CUTTING
Straight Cutting
Insert material between the
cutting blade and the base,
flush with the angle attachment
as shown and hold the material
with foot then push handle
down to complete a cut.
Warning:
Maintain control of
the handle. Do not allow
handle to slam back after
making a cut.
45° Cutting
Adjust the angle attachment to
45°. Insert material between
the cutting blade and the base,
against the angle attachment as
shown, then push the handle
down to complete a cut.
Warning:
Maintain control of
the handle. Do not allow
handle to slam back after
making a cut.
Warning:
Do not put your
fingers against the sharp edge
of the blade at any time.
