![background image](http://html1.mh-extra.com/html/d-cut/md-230/md-230_operation-manual_3079846003.webp)
3
CUTTING AND C
Installation 1
Install the table to the cutter
base with provided screws and
bolts as shown.
Warning:
Do not put your
fingers against the sharp edge
of the blade at any time.
Straight Cutting
Insert material between the
cutting blade and the base,
flush it with the guide bar as
shown and hold the material
then push handle down to
complete a cut.
Warning:
Maintain control
of the handle. Do not allow
handle to slam back after
making a cut.
Installation 2
Then insert the handle into the
handle base as show and
tighten provided screw.