![background image](http://html1.mh-extra.com/html/d-cut/lt-330/lt-330_operation-manual_494803003.webp)
3
Installation of the Cutter
Insert the handle into the handle base
as shown.
Warning:
Do not put your fingers
against the sharp edge of the blade at
any time.
Changing the Blade
Use the provided Allan wrench to
remove the five screws, then hold the
blade by each end and carefully move
the blade out of blade holder.
Note:
The flat side of the blade faces
the table.
Warning:
Do not put your fingers
against the sharp edge of the blade at
any time.