22
9
Controls
→
→
Battery installation
u
Inserting batteries
1. Remove the battery cover by pulling it
upward in the direction shown by the arrow.
2. Insert the batteries with correct polarity
( "+" to "+", and "-" to "-" ).
3. Replace the battery compartment cover.
* Install two high-quality 1.5V "AAA" alkaline batteries. Don't mix old batteries with
new batteries.
* Remove batteries when you won't use the remote controller for a long time. Liquid
leakage from old batteries may cause operation failure.
u
Notes for using remote controller
• Make sure there are no objects between the remote controller and its sensor.
• Don't place the remote control near a heater or in damp place. Strong impact to the
remote control may cause operation failure.
• Signal from the remote control may be disturbed by sun light or other bright light. In
this case, darken the room or move the TV.
12. VOL
Ïq
(Volume Up/Down)
Adjusts the sound level. Adjusts menu settings.
13. TV/PC
Selects TV or PC mode directly.
14. PSM (Picture Status Memory)
Recalls your preferred picture setting
15. SSM (Sound Status Memory)
Recalls your preferred sound setting
16. ARC
You can watch TV in various picture formats;
Auto,
16:9, 14:9, 4:3, 16:9 Zoom, 14:9 Zoom, 4:3 Zoom.
Repeatedly press the
ARC
button to select your
desired picture format.
Note.
16:9 and 4:3 in PC mode are available.
17. CC
Set the caption funtion.
18. INPUT
Selects the AV source of sub picture in PIP mode.
19. PIP
Displays a PIP(Picture In Picture) screen.
The PIP function is available in PC Analog or PC
Digital mode.
20. POSITION
Selects a position of PIP screen.
21. SWAP
Switches a main picture for sub picture in PIP mode.
The PIP screen will disappears after pressing the
SWAP button.
22. MODE
Selects a PIP screen mode. – 16:1, 9:1 and 4:1 mode.
23.
x
CH
y
Selects a program when RF signal is displayed in PIP
mode.
