11
Editing audio parameters - Input channels
Input gain
The range of the control over the input gain is -40dB to +6dB in
0.1dB steps. Pressing EDIT, the display shows:
Base delay
The maximum available delay between any input and output is 650mS. For
example, if the input delay on channel A is set to 500mS, the maximum
available output delay for any output fed from input A will be 150mS. The
readout units can be changed between time in milliseconds, distance in feet or
distance in metres.
Input parametric EQ
The display shows:
IPA Input A Gain
Input Gain = +6.0dB
IPA Input A Delay
Base Delay = 0.00mS
IPA Input A PEQ : 1 <>
1k00Hz Q=3.0 0.0dB
Use the GAIN allow to change its value. Pressing ENTER to confirm.
Note: The delay steps are 1mS (343mm) through FREQ, or 10uS (4mm)
through Q encoder.
There are eight bands of parameter equalisation available on every input.
The behaviour of each individual band can be changed to a variety of different
filter shapes, including high and low shelves. Changing the filter type is achieved
by pressing ENTER during editing any particular band. For more details about
the various types of filter available, please see page 27.
DSP-2040
User’s Manual
Summary of Contents for DSP-2040
Page 6: ...DSP 2040 User s Manual...
