AXU Mounting
AXF Mounting (only for
ARTEC-508A
&
ARTEC-510A
)
17
Introduction
The
AXU
series are designed for enclosures
ARTEC-506A, ARTEC-
508A, ARTEC-510A, ARTEC-526A
and different versions.
Introduction
The
AXF
series are designed for enclosures
ARTEC-506A
,
ARTEC-
508A, ARTEC-510A
and different versions.
Mounting instructions
You can consult the
AXU
mounting instructions for
artec 500 series
on
the web: www.dasaudio.com
Mounting instructions
You can consult the
AXF
mounting instructions for
artec 500 series
on
the web: www.dasaudio.com
ACCESSORIES
Safety Precautions
Wall plugs provided are to be used in brick walls only. For other wall materials, source the suitable wall
plug before use.
DAS Audio Group, S.L.,
is not responsible for use other than the recommended or whether it be the
result of insufficient strength of the support structure. Use only the screws and wall plugs supplied on
surfaces that will provide sufficient support. Do not use on surfaces such as plaster, and gypsum. It is highly
recommended and in most parts of the world mandatory, that a safety cable be used to secure the enclosure
to the structure.
To ensure optimum safety, the installation should be checked thoroughly at regular intervals replacing all
deteriorated elements.
Loosen the screws before reorienting the speaker. Never force the rigging elements.
Contact a licensed rigger if there is any doubt.
Manual del Usuario
/ artec 500 series /
User’s Manual
