24
ARA series Users Manual
ARA series
Networking
The ALMA network can be configured in the two previous seen
different ways:
-
Using STATIC IP on each of the devices.
By doing this no
DHCP server or router is needed. The control computer can
be connected directly to the network switch and to the racks.
The racks on each side of the PA can be daisy chained using
the in/out ethercons of the Matrix-66 (ETH/CTRL connectors).
The user shall introduce a unique IP address on every single
device. The Subnet Mask shall be configured as 255.255.255.0.
in all units.
- Using DHCP or Dymanic IP.
An ethernet switch with DHCP
sever capabilities shall be used, or a router to determine au-
tomatically IP addresses to all the units present on the net-
work. The switch shall be connected to the racks using the
ethercon IN conector of the Matrix-66.
By the use of the control buttons and display of the units, the
user can access the main network configuration menu and set
the working mode (static / dynamic) accordingly:
Summary of Contents for ARA Series
Page 1: ...ARA series Users manual www dasaudio com...
Page 49: ......
