Czur Shine, User Manual

Page: 18 / 23

2.
1.
2.2 Preparation
Unpack the Shine from the box, insert the foot pedal, plug in the USB cable
to connect the device to the computer, open the [CZUR Shine] software, and
you can start using the device.
Align and connect the black soft pad's notch with Shine's base properly.
Open the [CZUR Shine] software and check whether the black soft pad has
covered the entire preview screen, otherwise it will affect the algorithm and
scanning effect.
When the scanning task is heavy, it is recommended to use the foot pedal to
improve the efficiency.
Basic Version
Document Base Version
1.
14
Turn on Shine's own fill light to avoid
shadowing from the camera casing.
If you need to scan A3 format, stretch
the vertical bar.
3.
4.
5.
Take out device piece A (vertical bar) and the device piece B (hard document
base) from the packing box, align and connect them as in Figure 1, and then
tighten them with the hexagonal screws and the L-shaped screwdriver from
the packing box as in Figure 2.
corresponding model, download the [CZUR Shine] software, and install it on
the computer (you can also install, check the update, or upgrade the Windows
software directly from the CD-ROM). For software installation steps, please
refer to the installation interface prompts.