EN / CZone® Meter Interface (MI) User & Installation Manual
4
3 SAFETY AND INSTALLATION PRECAUTIONS
WARNINGS AND SYMBOLS
Safety instructions and warnings are marked in this manual by the following pictograms:
CAUTION
Special data, restrictions and rules with regard to preventing damage.
WARNING
A WARNING refers to possible injury to the user or significant material damage to the Meter Interface
if the user does not (carefully) follow the procedures.
A procedure, circumstance, etc, which deserves extra attention.
USE FOR INTENDED PURPOSE
1. The Meter Interface is constructed as per the applicable safety-technical guidelines.
2. Use the Meter Interface only:
•
In technically correct conditions
•
In a closed space, protected against rain, moisture, dust and condensation
•
Observing the instructions in the installation manual
WARNING
Never use the Meter Interface in locations where there is danger of gas or dust explosion or
potentially flammable products!
3. Use of the Meter Interface other than mentioned in point 2 is not considered to be consistent with the intended
purpose. BEP Marine is not liable for any damage resulting from the above.
ORGANIZATIONAL MEASURES
The user must always:
•
Have access to the user's manual and be familiar with the contents of this manual
MAINTENANCE AND REPAIR
•
Switch off supply to the system
•
Be sure that third parties cannot reverse the measures taken
•
If maintenance and repairs are required, only use original spare parts
GENERAL SAFETY AND INSTALLATION PRECAUTIONS
•
Connection and protection must be done in accordance with local standards
•
Do not work on the Meter Interface or system if it is still connected to a power source. Only allow changes
in your electrical system to
be carried out by qualified electricians
•
Check the wiring at least once a year. Defects such as loose connections, burned cables, etc. must be
corrected immediately
