CZEM Drill One Evo, Display Manual

Page: 8 / 36

8
Description of OLED display functions
Display of the selected map
The currently selected map is shown in the upper left part of the display with three indicator bars.
One (smallest) bar indicates map 1 with the lowest power, two bars the medium power and three bars the highest
power of the motorcycle. If the text SELECT MAP is displayed instead of the bars, then no map has been
selected yet. Press the MAP button on the handlebars to select your desired map stored in the controller.
If your motorcycle includes a colored LED, then the selected map is also indicated by a colored light on the LED.
In the main section, the display shows the following parameters:
You can switch between the different data by briefly pressing the button below the display. The upper
right corner shows which parameter is currently indicated on the display:
- KMH/MPH - speed o f the motorcycle
- RPM - engine rev counter
- VOLT - battery voltage
- CAPA - remainin g battery capacity
- ODO - odomete r
DRIVING SPEED
ENGINE REV COUNTER
BATTERY VOLTAGE BATTERY CAPACITY
DISTANCE COUNTER