Cytron Technologies UC00A, User Manual

Page: 17 / 21

​ ROBOT . HEAD to TOE
​
Product User’s Manual – ​ UC00A
7.2 Using UC00A for Communication between two PCs
a. Two PCs can communicate to each other by connecting them to
​
UC00A each.
Connect each PC like diagram below. Recommended to use
​
Male to Male jumper
wire to link the header socket and connect to UC00A, and simply plug it to each PC.
The connection should be:
a. RXI of UC00A on Computer A to TXO of UC00A on Computer B
b. TXO of UC00A on Computer A to RXI of UC00A on Computer B
c. GND of UC00A on Computer A to GND of UC00A on Computer B
b. Upon completion of connection, open HyperTerminal in each PC. Follow steps
mentioned in
​
Section 7.1
​
(c) to (i). The baud rate for each PC must be same.
c. User may start typing any character in HyperTerminal, for example: chatting between
two PCs. Example computer 1 (C1) and computer 2 (C2) are connect. Any character
typed in HyperTerminal C1 will also shown in HyperTerminal C2. Pictures below
show HyperTerminal for each PC.
Created by Cytron Technologies Sdn. Bhd. – All Rights Reserved
17