Operation
WARNING
Do not use the product if it is not working properly, or if it has
suffered any damage, for example:
•
damage to the power cord or its plug
•
damage caused by dropping the equipment
•
damage caused by splashing liquid onto it
WARNING
All alarm signals must be set within the limits specified in the
system documentation. Pressure and temperature control must be
activated while the system is in use to prevent the tubing system to
leak or break.
WARNING
Never exceed the operating limits stated in this document and on
the system label. Operation of the product outside these limits can
damage equipment and cause personal injury or death.
WARNING
Disconnect power to the product before installing the pump
tubing.
WARNING
Before connecting the filter to ÄKTA flux s, read the instructions for
use of the filter. To avoid exposing the filter to excessive pressure,
make sure that the pressure limit is set to the specified maximum
pressure of the filter.
WARNING
Make sure that the filter is installed according to instructions for
use of the filter.
2 Safety instructions
2.1 Safety precautions
20
ÄKTA flux s Operating Instructions 29046893 AG
