9.4
Repair and calibration
Introduction
Components not covered in this manual might not be calibrated or repaired by the
user. If any ÄKTA flux s components do not operate according to specifications,
contact your Cytiva representative.
WARNING
Do not attempt to perform any actions not described in this docu-
ment.
Always contact your Cytiva representative for advice if such a need
should arise.
Filter integrity test
This method can be used to check that the filter is not damaged and that it has been
mounted correctly.
Refer to
Filter integrity test, on page 108
9 Maintenance
9.4 Repair and calibration
176
ÄKTA flux s Operating Instructions 29046893 AG
