Unscrew the knobs on the
1.
terminals.
Twist the wire ends together.
2.
Connect the wires to the
3.
terminals, ensuring that wiring
polarity is correct.
Tighten the knobs securely.
4.
a
b
c
Wiring
The speakers must be
wired to your amplifier as
shown in the diagram.
Connecting the cables to the terminals
Polarity
CAUTION: Make sure that the wire with polarity marking (logo,
stripe, rib etc) goes to the + terminals on both the amplifier and
speakers and the plain wire goes to the - terminals.
If the cable includes a logo or arrow(s) as shown in the examples,
these should be aligned to flow towards the speaker.
logo
stripe
rib
Left +
Left -
CONTAINS FCC ID:
SSSBC127-X
Upgrade
MADE IN ENGLAND
5
4
3
AV
R
Right +
L
Right -
CAUTION!
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
ATTENTION!
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
WARNING:
ATTENTION:
THIS APPLIANCE
MUST BE EARTHED
CET APPAREIL DOIT
ÊTRE BRANCHÉ À
LA TERRE
PRE
OUT
