background image

Cyrus Mono X 200 Signature & Mono X 300 Signature 

User Instructions

8

SPECIfICATIONS

Power Supply

Voltage: ..............................................................As plate on rear of unit

Power Consumption

Standby ......................................................................................... <1W
ON (No Signal) ................................................................................23W
Maximum, Mono X 300 Signature .................................................750W
Maximum, Mono X 200 Signature .................................................525W
EMC & Safety Compliance..................................................................CE

Enclosure

Dimensions (WxHxD) ................................................ 215 x 75 x 365mm
Weight (Mono X 300 Signature) .....................................................6.4Kg
Weight (Mono X 200 Signature) .....................................................5.5Kg
Material ........................................................................Die cast chassis

Audio Performance (Mono X 300 Signature)

Input Sensitivity (50W 8

Ω

) RCA ...................................................381mV

Input Sensitivity (50W 8

Ω

) BAL ...................................................775mV

Input Sensitivity (225W  8

Ω

) RCA ................................................890mV

Input Sensitivity (225W  8

Ω

) BAL ..................................................1.78V

Input Impedance (RCA) .................................................................47k

Ω

Input Impedance (BAL) ..................................................................20k

Ω

Output Power (Continuous)  8

Ω

 ..............................................225Wrms

THD+N @2/3 full power ........................... (20Hz - 20kHz 8

Ω

) .. <0.05%

 

(1kHz 8

Ω

) ............. <0.004%

Slew Rate (input filter bypassed) ...............................................700v/μS
Frequency Response (-3dB) .............................................0.1Hz-300kHz
S/N Ratio (Ref. 225W / 8

Ω

) ........................................................116dBA

Chain Output (buffered) .............................................(unity gain) 890mV
(ref. 890mV RCA input, 1.78V Balanced input.)

Audio Performance (Mono X 200 Signature)

Input Sensitivity (50W 8

Ω

) RCA ...................................................381mV

Input Sensitivity (50W 8

Ω

) BAL ...................................................775mV

Input Sensitivity (150W  8

Ω

) RCA ................................................660mV

Input Sensitivity (150W  8

Ω

) BAL ....................................................1.3V

Input Impedance (RCA) .................................................................19k

Ω

Input Impedance (BAL) ..................................................................20k

Ω

Output Power (Continuous)  8

Ω

  .............................................150Wrms

THD+N @2/3 full power ........................... (20Hz - 20kHz 8

Ω

) .. <0.05%

 

(1kHz 8

Ω

) ............. <0.004%

Slew Rate (input filter bypassed) ...............................................700v/μS
Frequency Response (-3dB) .............................................0.1Hz-300kHz
S/N Ratio (Ref. 150W / 8

Ω

) ........................................................114dBA

Chain Output (buffered) .............................................(unity gain) 660mV
(ref. 660mV RCA input, 1.3V Balanced input.)

Cyrus reserves the right to change all specifications without notice. E & OE

Summary of Contents for Mono X 200 Signature













Reviews: