Cyrus DAC X Signature
User Instructions
6
switching On
The mains power to the DAC X Signature should normally be left on unless
left unattended for a long period when the mains power at the wall socket
should be switched off or the product disconnected from the AC supply.
When power is applied, the STANDBY key
a
is used for power control.
The Standby light
b
shows red when the DAC X Signature is in Standby
and green when operational.
selecting an input
Inputs may be selected from the front panel INPUT SELECT buttons
f
. As
a new input is selected the input name/number are displayed briefly. The
main display indication for input can be selected from the two options
available from the setup menu.
The factory default ‘small input’ display option will also identify the
sample rate of the selected source and indicate ‘Invalid Audio Format’
for program material which the DAC X Signature will not decode (such as
multi-channel digital sound from DVD players or satellite receivers).
Remote control operation
cyrus system remote controls
For convenience of operation, the DAC X Signature will respond to CD
system select commands from a Cyrus amplifier or system remote
control, switching on each time the CD system is selected and switching
off with power off commands. If the DAC X Signature is connected to
a different input (TU, AUX or AV) the remote response may be changed
through the set-up menu to match the connected input. Refer to the
paragraph ‘DACX connected to:’ in the ‘Setting up the DAC X Signature’
section to change the response.