3. Introduction
3.1 Inserting and removing the SIM card(s) and the
MicroSD card
Switch off the mobile phone and open the card slot on the back using
the provided tool. You can insert the MicroSD card into the slot on
the left. You can insert the SIM1 and SIM2 in the adjacent slots. The
SIM format for both cards is the Nano-SIM format. You can open and
unfold the SIM device by sliding it with your finger. You can then place
the SIM card(s) on the contacts. Make sure that the side of the SIM
card with the contact surface is placed on the contacts, and that it is
correctly aligned. The notch of the SIM card(s) must be at the top left,
flush with the insertion frame. After the SIM cards have been inserted
correctly, the SIM compartment can be closed and snapped in again.
Finally, the card compartment must be closed with the cover before the
device can be put into operation.
T I P :
Only change SIM cards and MicroSD card when the device is
switched off. Do not change cards when in standby mode as
this may also damage the cards.
3.2 Removing the battery
The battery is built-in and must not be removed.
N O T E :
The phone‘s battery may only be removed or replaced
professionally by authorized Cyrus personnel. In the event
of self-intervention, the warranty claim becomes void.
3.3 Battery charging via the power supply and USB-C
cable
Please charge the battery as follows:
1. Connect the Micro USB-C cable to the Micro USB-C port on the
phone and to the AC adapter on the other end.
2. Connect the plug to the socket. The battery icon will be dynamically
displayed, indicating that the device is charging.
3. A full battery icon will be displayed when charging is complete.
T I P :
You can also charge your mobile phone via a USB data
connection on your computer. You may not be able to charge
your phone with a USB cable if your phone‘s battery is
completely discharged. Then you should definitely use the
charger to charge the phone battery.
3.4 Battery charging via an inductive quick charging station
Please charge the battery as follows:
1. Connect the inductive quick charging station with the supplied Micro
USB cable and then to the power supply unit.
2. Plug the power supply into the socket.
3. Position your smartphone on the inductive quick charging station to
start the charging process.
4. The battery icon will then be flashing dynamically, indicating that the
device is charging.
4. Basic functions
4.1 Turning the phone on/off
Hold down the Power button for some time to turn the phone on or off.
T I P :
It takes some time for the phone to initialize, this process
can take up to three minutes. Starting the operating system
before the SIM card is inserted will prevent the phone from
using all its functions. Once a SIM card is inserted, the
phone automatically detects whether or not it can be used.
4.2 Locking and unlocking the display
If the phone has not been used for an extended period of time, the
screen will automatically go off and the phone will go into standby
mode to save battery power.
Lock screen/mobile phone:
Press the power button.
Unlock screen/mobile phone: Press the power button, the Back
button or the Home button to then
unlock the screen by swiping, entering
the password, pattern, face recogni-
tion, or pressing the Task Manager
button. By pressing the Task Manager
button once, the display can be
awakened and unlocked directly when
the screen is locked and„Swiping“ is
selected.
4.2.1 Face-ID
Open SETTINGS » SECURITY & LOCATION » SMART LOCK
1. Select TRUSTED FACE and read the information.
2. Select SET UP and read the information.
3. Click NEXT.
4. Click on ALLOW.
5. Follow the instructions on the display.
6
