Cyrus AV5 User Instructions Download Page 9

User Instructions

Cyrus AV8

7

GB

GB

WARRANTY

Specifications

Power Supply

Voltage:....................................................................As plate on rear of unit
Power consumption ........................................................................... (15W)
Safety Requirements ...................................................................EN 60065
EMC compliance....................................................... EN55013 & EN55020

Enclosure

Dimensions (WxHxD)..................................................... 215 x 75 x 365mm
Weight.................................................................................................2.8Kg
Material ..............................................................................Die cast chassis

Audio Performance

Analogue Inputs

Input Sensitivity.................................................................................200mV
Input Impedance  ................................................................................47k

Input Overload level (1KHz, 0.01%THD)..........................................2.165V
S/N ratio, (500mV i/p, max.vol.)........................................................ 80dBA
THD+N, (500mV i/p, max.vol.).........................................................0.008%
Channel separation (1kHz) ..................................................................99dB

Digital Inputs

Input voltage ...........................................................................500mV pk-pk
Input Impedance  ..................................................................................75

S/N ratio, (PCM in, 0dBFS)............................................................... 94dBA
THD+N, (PCM in, 0dBFS)................................................................0.008%

Analogue Outputs

Output voltage...................................................................................380mV
Output Impedance  .............................................................................220

Max output voltage................................................................................3.9V
Tape output voltage (PCM in, 0dBFS).....................................................2V

Decoding systems

PCM Stereo, Dolby Pro Logic II, Dolby Digital, DTS

Remote command specification

The remote command specification will be necessary when setting up a
programmable handset with a personal computer.
Transmission protocol:.............................................................. Philips RC5
RC5 Device address............................................................19 (Amplifier 2)

RC5 command list

1

Input 1

2

Input 2

3

Input 3

4

Input 4

5

Input 5

6

Input 6

7

Input 7

8

Input 8

9

Input 9

12

Standby

13

Mute

16

Volume up

17

Volume down

32

Input scroll up

33

Input scroll down

37

Stereo

80

Adjust up

81

Adjust down

83

Exit

88

Noise setup

91

Left front select

92

Centre select

93

Right front select

98

Left surround select

100

Right surround select

110

Input setup

111

Mode setup

118

Subwoofer setup

The warranty card enclosed should be completed by the Dealer and
the purchaser and returned to 

CYRUS

 or its Distributor within 8 days

of purchase. No Dealer or Distributor may vary the terms of this
warranty which is personal to the original Purchaser and is not
transferable.

Please retain the sales receipt as proof of purchase.

Warranty claims must wherever possible be made through the Dealer
from whom the equipment was purchased.
This warranty excludes:

 

Damage caused through neglect, accident, misuse, wear and
tear, or through incorrect installation, adjustment or repair by
unauthorised personnel. Any unauthorised servicing will result in
loss of guarantee.

 

Liability for damage or loss occurring in transit to or from the
purchaser.

 

Consequential damage, loss or injury, arising from or in
conjunction with this equipment.

Equipment for attention under warranty should be consigned return
carriage paid. If returned equipment is found to comply with the
published specification, 

CYRUS

 reserves the right to raise a charge.

The above conditions do not affect your statutory rights as a
consumer.

Summary of Contents for AV5










Reviews: