2
DAYTIME RUNNING LIGHTS (DRL) - 7" LIGHTS that are provided with DRL have
separate wires from the main 3-pin H4 plug. This is an optional hook up and does not affect
the headlight operation.
___ DRL Wire for Urban7 is Red wire
___ DRL Wire for Beast-II is Yellow Wire (DO NOT connect the short back lead)
Connect DRL wire to vehicle/motorcycle DRL wire. Harley motorcycles DRL wire is an
orange/white wire. If you are using ABIGC2A Harley adapter and your bike has the
orange/white wire, connect DRL to BLUE wire of the adapter.
If vehicle/car is not equipped with DRL, it can be connected to marker lights. On older bikes
that do not have DRL wire, it can be spliced into the low beam wire (white). This can be
easily done with a wire tapping crimp connector (not provided). As a final alternative DRL
can be connected via an accessory switch to +12VDC and make it operate manually or as
an accent light.
"URBAN"
ABIG7-A6K has a 2nd lead (green wire) for amber DRL lights. This can be used
as standard DRL or as directional lights in cars.
ALIGNMENT
For proper operation it is vital to check the aim of the headlight. See guideline. During
testing make sure:
a. The vehicle is on
level surface
b. There are no
excessive loads in the
vehicle affecting its
leveling
c. For motorcycles it is
a good idea to align
with the rider on the
bike
d. After alignment do
a road test to assure
proper visibility has
been achieved.
Further adjustment
may be necessary to
get the optimum
performance.
Ensuring undisturbed visibility of other drivers is vital to your safety.
Drive & Ride Safe!
