channel set to 255 and all following channels will not be tested.
The results will be displayed in the terminal similar to the following.
MTK> st
TE 864
RE 1008
OK
MTK>
The above error results are typical of a non-responding DUT.
Also note that when pressing the
START
button on the tester that
the test results are displayed in the terminal window without the
command response and command prompt as follows.
TE 864
RE 1008
Cypress Semiconductor Corporation
Page
16/20
The commands not related to the Standard Test configuration are
executed immediately from the command prompt. These are used
for interactive testing/debug or with a script for extended automated
testing.
