8
CY3270 PSoC® FirstTouch Guide, Document # 001-15945 Rev. **
Getting Started
4. From the top menu bar, click
Program
and then select
Programmer
. Within the Programmer
window, select
Port > FirstTouch
and Programming Mode button to Reset. Then, click the
Pro-
gram
button.
5. Once programming completes successfully, verify the project operation by doing as follows:
a. Temperature Sensing–the LED color varies based on changes in the ambient temperature
(the buzzer sounds at extreme temperatures).
b. Light Sensing–the LED intensity varies based on changes in the ambient light.
c. CapSense Proximity Sensing–the LED color varies based on your hand’s proximity to the
board.
2.4
FTMF Expansion Card Demonstrations
The FTMF Expansion Card provided in your kit is capable of supporting a variety of demonstrations.
Each demonstration has an associated PSoC Express project and data sheet that describes the
operation and usage of each of the demonstrations in detail. Since the FTMF expansion card has its
own PSoC, you can remove it from the FTPC bridge and insert it into your target hardware or other
development platform. In order to observe each of the various FTMF demonstrations, it is necessary
to reprogram the FTMF card with the appropriate demonstration firmware. For more details refer to
the
Technical Reference chapter on page 17
.
Figure 2-1. FTMF Expansion Card
LED Display
Light Sensor
CapSense
Slider
Temperature
Sensor
Proximity
Antenna
Buzzer
