© 2011-2013 Cypress Semiconductor Corporation. All rights reserved. All trademarks or registered
trademarks referenced herein are the properties of their respective owners. Doc.#: 001-66478 Rev. *B
http://www.cypress.com/go/CY8CKIT-031
For the latest information about this kit, visit
PS
O
C
®
C
AP
S
ENSE®
EXPANSION BOARD KIT
QUICK START GUIDE
Programming with PSoC 3 Development Kit
1. Plug the USB cable into your PC and to J1
of the PSoC 3 Development Kit.
2. Open
BMM_USB_KIT-030
code example
from the PSoC Creator start page.
3. Click the Program icon in PSoC Creator to
program the board.
4. Unplug the USB cable to disconnect power
from the board.
Note:
Connect jumper J2 on the Matrix Button
Module board to SHLD.
Test PSoC CapSense EBK with PSoC 3
DVK
1. Connect J1 of the PSoC CapSense
Expansion Board Kit to Port D of the
PSoC 3 Development Kit; connect J2 to the
Matrix Button Module Kit. Remove the
LCD from the development kit to avoid
parasitic capacitance.
2. Connect the USB cable to J2 of the PSoC 3
Development Kit and wait for USB
Enumeration LED, LED4 to turn on. Refer
to UG mentioned in step 4 for more details.
3. Touch a button; the corresponding row and
column LEDs turn on.
CY8CKIT-031 Hardware Overview and Features
5
6
2x20-Pin
Connector for
DVK Interface
2x22-Pin
Connector for
CapSense
Interface
1x5-Pin Connector for I2C Interface
