CY8CKIT-014 PSoC 5 FirstTouch Starter Kit Guide, Spec. # 001-57708 Rev. **
15
Example Projects
Figure 4-4. Program
4. The project is programmed successfully as shown in
.
Figure 4-5. Program Successful
5. When the download is complete, remove the USB cable from the PSoC 5 FirstTouch Starter Kit
board and connect a 9V battery to the battery connector.
6. Follow the steps in section
3.1 Install Hardware on page 9
to see your message displayed.
4.1.4
Open and Modify the PSoC Rocks SAR ADC Project
1. Click on the example project the
PSoCRocks SAR ADC
from
Kits and Solutions
present on the
start page of the PSoC Creator.
2. Make a folder in the desired location and click OK.
3. Project opens up in the PSoC Creator and gets saved in that folder.
4. Follow steps 1 to 3 in
Modify the PSoC Rocks Project on page 14
to modify the rasterized image.
5. Follow steps 1 to 6 in
Build, Program, and Run the PSoC Rocks Project on page 14
to program
the project into the PSoC 5 FirstTouch Starter Kit board and verify the output.
4.1.5
Schematic Design PSoC Creator
This project's customized hardware configuration is viewed by opening the
TopDesign.cysch
file
located in the Workspace Explorer window. PSoC Creator's schematic design entry methodology,
using pre-defined peripheral functions called components, allows rapid hardware definition and
implementation.
The schematic entry system works similarly to standard circuit board schematic entry tools, with the
exception that all components and routing are automatically implemented within the PSoC device
rather than on a PCB. This allows you to create custom solutions using peripherals commonly found
in MCU designs as well as analog peripherals, digital peripherals, and logic, not possible with any
other microcontroller or System on Chip. In many designs, traditionally external resources are able
to be fully integrated within the PSoC device.
The PSoC Rocks design schematic uses several peripheral and circuit elements. A single analog
input pin connected to the accelerometer's Y axis is routed to an SAR ADC. A pin component with 3
Summary of Contents for PSoC 5 FIRSTTOUCH CY8CKIT-014
Page 4: ...4 CY8CKIT 014 PSoC 5 FirstTouch Starter Kit Guide Spec 001 57708 Rev Contents...
Page 8: ...8 CY8CKIT 014 PSoC 5 FirstTouch Starter Kit Guide Spec 001 57708 Rev Getting Started...
Page 32: ...32 CY8CKIT 014 PSoC 5 FirstTouch Starter Kit Guide Spec 001 57708 Rev Example Projects...
Page 44: ...44 CY8CKIT 014 PSoC 5 FirstTouch Starter Kit Guide Spec 001 57708 Rev Technical Reference...
