PR
O
C
TM
BLE REMOTE CONTROL REFERENCE DESIGN KIT
© 2014 - 2015 Cypress Semiconductor Corporation. All rights reserved.
All trademarks or registered trademarks referenced herein are the properties of their respective owners.
001-93658 Rev.*A
CY5672 QUICK START GUIDE
The PRoC BLE remote control supports:
• Plug-and-play microphone functionality with the CySmart USB dongle (can be tested with any application like
Sound Recorder on Windows)
• Trackpad with gestures (mapped to Windows functions for demonstration) like:
- Finger tracking for cursor movement, one-finger tap for left click and two-finger tap for right click
- Two-finger pinch in/out for zoom in/out
- One-finger swipe at right and bottom edges for vertical and horizontal scrolling* respectively
- One-finger swipe down on top edge to go to Start Screen (for Windows 8 and later)
• Six-axis motion sensing for cursor movement
• Buttons for left click, right click, volume control, power**, channel control**, return** and source** functions
• Bluetooth Smart and Infrared (IR) connectivity
• LED indications for low battery and connection status
• 10-pin header to enable programming and debugging using MiniProg3
The PRoC BLE remote control works with any Bluetooth Smart Ready HID-compatible device. For details, read the
user guide available at
www.cypress.com/CY5672
*Only for applications which support AC Pan usage
** These features can be evaluated using Cypress’s CySmart
TM
tool available at
www.cypress.com/CySmart
For the latest information on PRoC BLE, visit
www.cypress.com/PRoCBLE
For the latest information about this kit and to download the kit installer with software and hardware files, visit
www.cypress.com/CY5672
Microphone
Microphone Button -
Press and Hold to
Use Microphone
Volume Control
Buttons
Left Click
Right Click
Trackpad
Channel
Control Buttons
Power Button
(for host device)
Status LED
Connect Button
Infrared Diode
PRoC BLE
Provision to Measure
PRoC BLE Current
(Jumper J1)
10-pin Header for
Programming/
Debugging
PRoC BLE
Two AAA Battery
Holder
Grooves for M2 X 5 mm Screws
to attach Back Cover
Antenna
Source Button
Return Button
Button to switch between Motion Sensor and Trackpad
Note: There is no ON/OFF switch on the remote. Remove the jumper J1 to power off the remote if needed
1
1
1
2
3
4
2
3
4
