WICED Manufacturing Bluetooth Test Tool, Document Number: 002-14799 Rev. *E
8
6
LE Test End
This command stops the LE Transmitter or LE Receiver Test that is in progress.
The number of packets received during the test is reported by the device and printed out. The value will always be zero if the
LE Transmitter Test was active (See Reference [
1
] [Vol 2, Part E], Section 7.8.30 for details).
Usage
:
wmbt le_test_end COMx
The example below stops the active test:
<ModusToolbox>\tools\wiced-tools-1.0\BT\wmbt\bin> wmbt le_test_end COM23
MBT_BAUD_RATE: 3000000
TRANSPORT_MODE: 0 (HCI)
Opened COM23 at speed: 3000000
Sending HCI Command:
0000 < 01 1F 20 00 >
Received HCI Event:
0000 < 04 0E 06 01 1F 20 00 00 00 >
Success num_packets_received = 0
Close Serial Bus
