MB2146-301A-E F
2
MC-8FX Family for MB95FV100D-101 MCU Board Operation Guide, Doc. # 002-07496 Rev. *A
5
Preface
■
Caution of the products described in this document
The following precautions apply to the product described in this manual.
CAUTION
Indicates a potentially hazardous situation which, if not avoided appropriately, may
result in minor or moderate injury and/or damage to the product or the equipment
to which the product is connected, to software resources such as data, or to other
properties.
Cuts, Damage
Before moving the product, be sure to turn off all the power supplies and unplug the
cables. Watch your steps when carrying the product. Do not use the product in an
unstable location such as a place exposed to strong vibration or a sloping surface.
Doing so may let the product fall, resulting in an injury or fault.
Cuts
The product has some sharp-pointed or edged parts inevitably exposed, such as
jumper plugs. Use meticulous care in handling the product not to get injured with
such pointed parts.
Damage
Neither put anything on or apply shock to the product. Once the product has been
powered, do not carry it.
Doing either may cause a fault due to overloading or shock.
Damage
Since the product contains many electronic components, keep it away from direct
sunlight, high temperature, and high humidity to prevent condensation. Do not use
or store the product where it is exposed to much dust or a strong magnetic or
electric field for an extended period of time.
An adverse operating or storage environment can cause a fault.
Damage
Use the product within the ranges of its general specifications.
Operating it outside the range of any general specification may cause a fault.
Damage
To prevent electrostatic breakdown, do not let your finger or an object touch any
metal part of the connector. Before handling the product, touch a metal object (such
as a door knob) to discharge static electricity from your body.
Damage
Before turning the power on, in particular, be sure to finish making all the required
connections. To set up and use the product, follow the instructions given in this
document.
Using the product incorrectly or inappropriately may cause a fault.
Damage
Before plugging or unplugging any cable for this product, be sure to turn the power
supply off. When unplugging a cable, remove it while holding the connector without
pulling the cable itself. Pulling the cable itself or bending it may expose or
disconnect the cable core, resulting in a fault.
Damage
Because the product has no casing, it is recommended that it be stored in the
original packaging. Re-transporting the product may damage it to cause a fault.
Keep the packaging materials used for shipment of the product and use them when
re-transporting it.
