EZ-USB FX3 HD 720p Camera Kit - Quick Start Guide, Rev. 2.0
11
Getting Started
2.3
Camera Kit Assembly
1. Connect the interconnect board to the FX3 DVK via the GPIF II Samtec connector
2. Connect the Aptina image sensor headboard to the interconnect board via the 26-pin connector.
The male connector is located on the back of the Aptina image sensor headboard and the female
connector is on the front of the interconnect board
Note:
See demo video for kit assembly on
http://www.cypress.com/?rID=72422
Figure 2-3. EZ-USB FX3 HD 720p Camera Kit Assembly
