Hardware
CY4502 EZ-
PD™ CCG2 Development Kit Guide, Doc. No. 001-96601 Rev. *B
30
Figure 4-2. CY4502 board
4.1 CY4502 Board Details
The CY4502 board hardware consists of the following components:
U1: CCG2 controller in CSP package (CYPD2103-20FNXIT)
U2: CCG2 controller in DFN package (CYPD2103-14LHXIT)
LED1: Power (VCONN) indicator of U1
LED2: Power (VCONN) indicator of U2
J6: Power measurement jumper
J7: Jumper to select one-chip/two-chip EMCA solution
J5: Jumper to select configuration with both chips powered in the two-chip EMCA solution
J8/J13: Jumpers
to select the responsiveness to SOP” packets for U1/ U2 respectively
J1/J2: USB Type-C plugs
J3/J4: SWD connectors
J9: 20-pin header (Not mounted on the DVK)
4.2 CCG2 Controller
CY4502 board consist of two CCG2 controllers they are
U1: CCG2 controller in CSP package (CYPD2103-20FNXIT)
U2: CCG2 controller in DFN package (CYPD2103-14LHXIT)
This DVK emulates a passive EMCA solution with the option to select one-chip (one CCG2 for the whole cable) and two-
chip (with one CCG2 per cable plug) solutions. This EMCA solution contains two CCG2 devices (U1 and U2), one for each
plug, as shown in
Type-C Plug, J1
20-pin Header
LED2
LED1
SWD Header, J3
SWD Header, J4
Type-C Plug, J2
J6
J8
J7
J5
J13
CCG2, U2
(CYPD2103-14LHXIT)
CCG2, U1
(CYPD2103-20FNXIT)
